Conductivity Meters

Conductivity Meters laboratory items

Conductivity Meters

Active filters

€80.00

Hanna Instruments HI98304 DiST 4 is a large-scale Electrolytic Conductivity (EC) meter that can measure up to 20.00 mS / cm making it ideal for various applications such as water treatment, boilers and cooling towers, agricultural, including hydroponics and general laboratory use.

DiST 4 is a durable and reliable pocket controller for use in the lab or field.

This modern meter is simply 0.7 "and is extremely ergonomic, fitting comfortably in your hand.

With two-button operation. one for ON / OFF, the other for calibration.

€135.00

The HI98311 is an advanced waterproof tube and TDS test (ppm) for quick and easy measurements while on the go.

This lightweight, waterproof conductivity controller offers accurate conductivity (0 to 3999 μS / cm), TDS (0 to 2000 ppm) and temperature measurements in a single portable pocket device.

Conductivity range 0 to 3999 μS / cm

Conductivity analysis of 1 μS / cm

Conductivity accuracy ± 2% F.S.

TDS range 0 to 2000 ppm (mg / L)

TDS 1 ppm (mg / L)

Accuracy TDS ± 2% F.S.

Temperature range 0.0 to 60.0 ° C / 32.0 to 140.0 ° F

€165.00

The Combo® pH, EC, TDS (ppm) meter and the low-level temperature gauge are Hanna's most popular meters.

The waterproof design, simple operation and replaceable electrode mean you can rely on this meter for years.

HI98129 is designed for low range use (0 to 3999 μS / cm or 0-2000 ppm).

PH range 0.00 to 14.00 pH

PH analysis 0.01 pH

pH Accuracy ± 0,05 pH

Conductivity range 0 to 3999 μS / cm

Conductivity analysis of 1 μS / cm

Conductivity accuracy ± 2% F.S.

TDS range 0 to 2000 ppm (mg / L)

TDS 1 ppm (mg / L)

Accuracy TDS ± 2% F.S.

Temperature range 0.0 to 60.0 ° C / 32.0 to 140.0

Temperature analysis 0.1 ° C / 0.1 ° F

Temperature accuracy ± 0.5 ° C / ± 1 ° F

€180.00

HI98331 Soil Test ™ is a pocket tester specially designed to directly measure ground conductivity (EC) and temperature.

Small size, single-button operation and automatic calibration, ground test is an excellent choice for taking direct ground conductivity measurements.

€220.00

The HI98131 is a thin, lightweight and waterproof pocket controller that measures pH, conductivity (EC), TDS (ppm) and temperature.

Simple operation with two buttons and advanced functions, including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm). for your essential tests.

€285.00

The HI9814 is a thin, lightweight and waterproof portable meter that measures pH, conductivity (EC), total dissolved solid (TDS) and temperature with a reinforced probe.

The meter function is simplified by two buttons. One is used for on / off and for calibration, while the other is used to switch between metering modes.

The HI9814 features advanced features, including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).

€300.00

HI9811-5 is a waterproof and portable meter that measures pH, conductivity (EC), total dissolved solid (TDS) and temperature (° C) with a single sensor.

The meter function is simplified with special buttons to display the LCD and EC / TDS calibration buttons at one point.

It is most suitable for agricultural, greenhouse and hydroponic applications.

It has 3 in 1 sensor with pH, ​​EC / TDS and temperature sensors, enhanced pH electrode for discharge from electrical noise, including ballasts and pumps

As well as a large LCD with instructions

€370.00

Digital Eutech Salt 6+ Saltmeter

Measuring range 1 to 50.0 ppt. 0.1 to 5.00%

Analysis & Accuracy 0.1 ppt; 0.01% & ± 1% full scale

TDS Factor Non-linear compensation

Temperature range 0 to 100.0 ° C

Resolution & Accuracy 0.1 ° C & ± 0.5 ° C

Temperature compensation Automatic / Manual (0 to 80 ° C)

Temperature factor 2% / ° C

Number of calibration points 1 point

Special functions Automatic shutdown after 17 minutes.

Preservation & Self-Diagnostic Messages

Power 4 'AAA' x 1.4V batteries

Top